Primer for exposed concrete 4507 B – TONE
- მიწოდების სავარაუდო დრო: მაქსიმუმ 4 სამუშაო დღე
Description
A solvent-free primer for exposed concrete surfaces, based on polymer
dispersion.
Areas of application
-
- Used on interior and exterior surfaces,
- on horizontal and vertical surfaces,
- on ceilings,
- as a primer, which improves the adhesion of gypsum, lime and cement mortars to the concrete surface.
Properties
- Provides roughness to the smooth surface of concrete, which improves adhesion.
- Prevents rapid evaporation of water in gypsum and cement plasters, which ensures long service life and ease of use.
- Ready to use. Can be applied by brush or roller.
- Does not contain solvents.
- Odorless.
Surface preparation
- Make sure that the surface is dry, clean and solid.
- The surface should be free from residues such as dust, dirt, grease, paint, which can prevent adhesion.
- Remove cracked plaster, weak layers that do not have supporting strength, cement residues from the surface.
- Fill cracks and correct defects of the surface to be treated with Tamirart and cover cracks.
Instructions for use
- To 12 kg of B-Tone, add 4-6 l of water, stir thoroughly and apply
to the surface with a brush or roller. The mixture should be prepared with a mixer, at a speed of
no more than 500 rpm. - The resulting mixture is applied to the surface with a roller.
- During application, it is necessary to constantly stir the mixture.
Care and further recommendations for use
- Drying time – 45-60 min. During the drying process, other materials cannot be applied on top.
- The temperature of the surface on which the material is applied must be at least
+5°С. There should be no precipitation of any kind on the surface. - After at least 24 hours of drying of B-Tone, plaster can be applied on top.
- After applying the primer, it is necessary to wash hands and tools thoroughly.
- The consumption is shown as a general information. Consumption may vary depending on the conditions of use and surface characteristics.
- For more detailed information, see the safety data sheet.
Storage
- Store at temperatures between +5°C and +35°C, protected from direct sunlight,
stacking in a maximum of 3 layers. - Protect from frost and severe weather conditions.
- Storage period is 12 months in unopened condition.
Packaging
12 kg and 25 kg plastic buckets.








