101% Original
Lowest Price
Free Shipping

Matt water-based paint for interior work with silicone 5167 Joker Plus Mat

  • Check Mark მიწოდების სავარაუდო დრო: მაქსიმუმ 4 სამუშაო დღე
  • Visa Card
  • MasterCard

Product Description
Matte washable paint based on acrylic emulsion for interior work with silicone.

Area of ​​application
Used on properly prepared new mineral surfaces, such as rough plaster, concrete, cement tiles, gypsum board, unpainted surfaces, plasterboard, wallpaper and glass wallpaper inside buildings.

Properties — The paint structure gives a special shine that perfectly distributes light. —The paint withstands wet cleaning, cleans perfectly. —Has high opacity. —Does not leave roller marks. —Due to high vapor permeability, it ensures the breathing of the walls. — Does not contain solvents, is diluted with water and therefore has no odor and is safe for human health and the environment.

Instructions for use— The surface to be treated must be free of adhesion-impairing factors such as dust, dirt or grease, as well as old or peeling paint layers, and must be clean and durable. Before using on new mineral surfaces, it is necessary to wait 28 days until the surface has fully hardened. It is necessary to take all measures for waterproofing the building from the very beginning. — Clean the previously painted surface with sandpaper and remove the formed dust. — If necessary, fill the cracks and level the surface with a thick acrylic putty KALIN AKRILIK MAKUN or Kalekim TAMIRART or MACUNART. — Clean the old solvent-based surfaces thoroughly with sandpaper and remove the formed dust. — Treat the surfaces with old paint residues, as well as previously painted and dirty surfaces whose color you want to change, with the primer “Kale Salistar”, and the newly painted absorbent surfaces with the primer for highly absorbent surfaces “Kale SATEN ALCI ASTARI” or “Kale SILASTAR”.

— Stir JOKER PLUS MAT well before use. —Joker PLUS MAT diluted in clean water to a maximum of 10% by volume and applied to the surface in two layers with a brush, roller or spray. — At least 6 hours should elapse between layers. — Wash tools with water immediately after use. — During painting and for the next 24 hours, it is recommended that the temperature of the room and the painted surface not be lower than 5°С.

Warnings —S2 Keep out of reach of children. —S24 / 25 Avoid contact with eyes and skin. —S46 B In case of contact with the body, seek medical advice immediately.

Storage — Store in unopened packaging at a temperature of 5°С-З5°С. — Shelf life in unopened condition is 72 months.

Packaging
— 2.5 l, 7.5 l and 15 l plastic buckets
—2.5 l buckets are wrapped in film in pairs
Average consumption: 15 l per person 120 m2 –
150 m2

Technical specifications