Thin leveling compound ready to use on water base – 5510 Ince Akrilik Macun

Description
A leveling, optimally thin ready-to-use acrylic emulsion-based compound for correcting defects on interior surfaces.

Area of ​​application
● For leveling concrete and mineral plastered surfaces, filling shrinkage cracks and as a base coat for previously painted surfaces after cleaning.

Properties
● Forms a hard, smooth surface that does not chip.
● Moisture-resistant.
● Does not prevent walls from “breathing”.
● Less absorbent, which reduces the consumption of finishing materials.
● It has a high opacity, so the surface becomes smooth after a maximum of two coats.

Instructions for use
• Clean the surface from dust, dirt, oil and paint stains that prevent adhesion.
Remove old flaking paint layers. Carry out waterproofing works on the building.
• In highly absorbent or unstable areas, it is recommended to use “Kale SATEN ALCI ASTARI”,
“UNISTAR” or “SALISTAR”.
• Treat very defective surfaces with “KALIN AKRILIK MACUN”.
• Depending on the smoothness of the surface, apply İNCE AKRİLİK MACUN in 1 or 2 layers using a trowel or flexible metal
spatula.
• Within 24 hours after application, sand off any irregularities, spatula marks and filler marks with an abrasive material.
• Before applying the finishing agent, it is recommended to use Kale “SATEN ALCI ASTARI”, “UNISTAR” or “SALISTAR” primers.

Warnings
• During painting and for the next 24 hours, the minimum air temperature in the room and on the surface to be painted should be +5°C, and atmospheric precipitation should not fall on the surface.

• It is recommended to moisten very hot surfaces before painting.

Storage
● Store at a temperature of 5 – 35° C.

Packaging
● 5 kg and 25 kg plastic buckets.
● 5 kg buckets are packed in two pieces in a film.

Technical specifications