Finishing plaster for manual and machine work – 4041 Kalekim Ince Siva

Description
A cement-based finishing plaster mixture, improved with special additives, intended for manual and machine work.

Areas of application
· For interior and exterior work, to obtain a smooth surface,
before painting, ceramic coating and insulation.
· To be applied on rough cement plaster, concrete and facing concrete.
· Used for bricks, beams, walls and ceilings.

Features
· Has a high level of adhesion
· Forms a smooth and hard surface
· Resistant to freeze-thaw cycles
· Can be applied in thicknesses of 3-10 mm
· It is easy to use

Surface preparation
· The surface must be dry, clean and solid
· The surface to be treated must be cleaned of dust, mud, oil,
laitance, paint and similar substances that prevent
adhesion.
· Cracked plaster, weak parts,
underlayers that do not have supporting capacity, residues of mortar and cement should be removed from the surface.
· Any detached parts, damage and cracks on the surface
should be repaired with products from the Tamiart series.
· Before application, moisten the surface or treat with
KalekimAstar primer.
· Before applying to exposed concrete, be sure to use B-tone.

Instructions for use
· Gradually pour 25 kg of INCE SIVA into 5.5-6 liters of water and mix with a mixer at low speed until a homogeneous mass is obtained.
It is not allowed to add any substances that are not specified in the instructions
· Leave the prepared mortar for 5-10 minutes. Stir again for 1-2 minutes before use.
· Apply the prepared INCE SIVA mortar to the surface with a metal spatula, in a layer of less than 10 mm thick. For thicker layers, wait at least 1 day.
· To give the surface its final appearance, polish it with a damp sponge.

Care and recommendations after use
· After application, during the drying process, moisten the surface at certain time intervals as necessary.
· Do not apply other products until the first layer is completely dry.
· Discard the mortar after the expiration date or in case of crust formation. High temperatures, low humidity, wind and similar natural conditions can shorten the specified shelf life.
· After finishing work, wash your hands thoroughly and wash tools with water.
· The information on consumption is general information. Consumption depends on the conditions of use and the characteristics of the surface.
· The product is cement-based, so do not breathe dust, avoid contact with eyes and skin. For more detailed information, see the product safety data sheet.

Warnings
· Do not breathe dust, avoid contact with eyes and skin. For more
detailed information, see the technical data sheet.
· The specified consumption is given for information. Consumption
depends on the conditions of use and the characteristics of the surface.

Storage
· Store at a temperature of +5-30oC in a dry, clean place, protected from moisture and direct sunlight.
· Protect from water, frost and harsh weather conditions.
· The substrates can be laid in a maximum of three layers.
· If the above conditions are observed, the maximum storage period
is 12 months.

Quality certificates

Ready-to-use general purpose finishing plaster, in accordance with the standards EN 998-1.

Technical specifications