101% Original
Lowest Price
Free Shipping

Silicone matt paint 5156 KALIA MAT – GEO

  • Check Mark მიწოდების სავარაუდო დრო: მაქსიმუმ 4 სამუშაო დღე
  • Visa Card
  • MasterCard

Description
Matte, washable, decorative paint for interior decoration
Based on acrylic emulsion with silicone additives.

Area of ​​use

  • Used for painting properly prepared mineral surfaces,
    such as rough plaster, concrete, asbestos-cement and gypsum-cardboard tiles, as well as
    painted surfaces, plaster, wallpaper and glass wallpaper in interior spaces.

Properties

  • The content of silicone additives enhances anti-wear properties and
    makes cleaning easier.
  • Has high coverage.
  • Has high opacity.
  • Has high vapor permeability, which ensures that the walls “breathe”.
  • Since the paint is water-based, it is not hazardous to health and does not harm
    the environment.

Application Instructions

  • Clean the surface to be painted from dust, dirt, grease, as well as old and swollen layers of paint to a clean and stable state. Before painting a new mineral
    surface, you must wait 28 days until the surface is completely hardened.
    It is necessary to ensure the waterproofing of the building in advance.

  • Clean the surface previously painted with old synthetic paint thoroughly with sandpaper and remove any dust from the surface.
  • If necessary, fill the cracks and level the surface with acrylic thin putty “INCE AKRILIK MACUN” or “MACUNART”.
  • To obtain an ideal coating, it is necessary to level the entire surface with acrylic thin putty “INCE AKRILIK MACUN” or “MACUNART”.
  • Painting surfaces covered with old paint, as well as previously painted and dirty surfaces, the color of which you want to change, should be treated with “Kale Salistar” primer,

    while newly painted absorbent surfaces should be treated with “Kale SATEN ALCI ASTARI”

    “Kale Salistar” primers with a strong For absorbent surfaces.

  • The paint should be mixed well before use. Dilute KALE MAT with clean water, maximum
    25%, and apply to the surface in two layers with a brush, roller or spray.
  • Wait at least 2 hours between layers.
  • Wash tools with water immediately after use.
  • During painting and for the next 24 hours, it is recommended to maintain the air temperature in the room and on the painted surface at least 5°C.

Warnings

  • Store in closed containers at a temperature of 5°C to 35°C.
  • The shelf life in unopened packaging is 36 months.

Packaging

  • 2.5, 7.5 or 15-liter plastic bucket By volume.
  • 2.5L cans are placed in a film packaging, 2 pieces each.

Quality certificates
TS 5808

Technical specifications