Super-elastic water-based facade paint 5110 Performa+

Description
Super-elastic acrylic paint for facades based on acrylic emulsion,
retains elasticity down to -30°C.

Area of application

Used on facades of all mineral surfaces, plaster, concrete surfaces,
as well as on old painted surfaces.

Properties

Retains elasticity in the temperature range of -30°C, -60°C.
Resists surface cracks, creates a highly elastic coating.
Features low consumption, good coverage.
Waterproof, prevents salt release, resistant to cracks caused by temperature changes, resistant to mold and chemical corrosion.
Does not prevent the walls from “breathing”.
Resistant to wear.
Water It is based on, odorless, safe for humans and the environment.

Instructions for use

Clean the surface to be painted from dust, dirt, grease, as well as old and swollen layers of paint to a clean and stable state. Before painting a new mineral surface, you must wait 28 days until the surface has completely hardened.
It is necessary to ensure the waterproofing of the building in advance.
If necessary, fill cracks and level the surface with acrylic thick putty “ALIN AKRILIK MACUN” or “TAMIRART” or “MACUNART”.
Suitable surfaces with old paint residues or new mineral surfaces
are treated with “UNIASTAR” or “SILASTAR”, highly absorbent mineral surfaces
are treated with acrylic primer “AKRILIK ASTAR”.
The paint must be stirred well before use.
Before use, dilute PERFOMA+ with clean water, maximum 10%, and apply
to the surface in two layers with a brush, roller or spray.
Wait at least 6 hours between layers.
Wash tools with water immediately after use.
When painting and It is recommended to maintain the air temperature in the room and on the painted surface at least 5°C for the next 24 hours.
Do not use in very hot weather, direct sunlight, strong wind, fog, high humidity or rain.
Very hot surfaces should be moistened before painting.
Do not use the paint on wet vertical surfaces.